Wuxi Jianbang Haoda Steel Co., Ltd
We mainly supply aluminum plate, aluminum coil, aluminum rod, aluminum tube, aluminum checkered plate, Corrugated aluminum plate, copper plate, copper coil, copper pipe and copper bar .
Add to Cart
What is 7050 aluminum used for?
Alloy 7050 aluminum plates, more so than 7075, are used frequently for aerospace requirements, particularly in the range of 3 to 6 inches thick. In fact, this alloy is often used in aircraft components such as fuselage frames and bulkheads.
What is the difference between 7050 and 7075?
| Products Name | aluminum bars |
| Material | Aluminum |
| Other Material | 1060, 1050, 1070, 1100, 3003, 3004, 5052, 5652, 5154, 5254, 5454, 5083, 5086, 5056, 5456, 2024, 2014, 6061, 6063 ,etc |
| Standard | ASTM, SUS, DIN etc |
| Surface | Bright, polished, hair line, brush, embossed, etc |
| Payment Term | L/C , D/A , D/P , T/T , West Union , Money Gram , other |
| Price Term | FOB, CIF, CFR , CNF etc |
| Package | Export standard package:bundled wooden box or be required; The inner size of container is below: (1)20 foot GP:5.8m(length)x2.13m(width)x2.18m(high)about24-26 CBM (2)40 foot GP:11.8m(length)x2.13m(width)x2.72m(high)about68 CBM |
| Delievery Time | 5-15days |
| Loading Port | china |
| Supply Ability | 3000 tons per yaer |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | OTHERS | OTHERS | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | — | 0.05 | 0.03 | 0.03 | — | 99.5 |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | — | 0.04 | 0.03 | 0.03 | — | 99.7 |
| 1100 | 0.95 Si + Fe | 0.05-0.20 | 0.05 | — | — | 0.1 | — | 0.05 | 0.15 | 99 | |
| 2024 | 0.5 | 0.5 | 3.8-4.9 | 0.30-0.9 | 1.2-1.8 | 0.1 | 0.25 | 0.15 | 0.05 | 0.15 | Rem. |
| 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | — | — | 0.1 | — | 0.05 | 0.15 | Rem. |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | — | 0.25 | — | 0.05 | 0.15 | Rem. |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0-1.5 | 0.20-0.6 | 0.1 | 0.25 | 0.1 | 0.05 | 0.15 | Rem. |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.50-1.1 | 0.1 | 0.25 | — | 0.05 | 0.15 | Rem. |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | — | 0.05 | 0.15 | Rem. |
| 5252 | 0.08 | 0.1 | 0.1 | 0.1 | 2.2-2.8 | — | 0.05 | — | 0.03 | 0.1 | Rem. |
| 6061 | 0.40-0.8 | 0.7 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | 0.05 | 0.15 | Rem. |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.2 | 0.05 | 0.15 | Rem. |
| Alloy | Temper | Tensile Strength | Yield Strength | Elongation (%) | Tensile Strength | Yield Strength | |
| (ksi) | (ksi) | 0.01-0.05 in | 0.051-0.125 in | (MPa) | (MPa) | ||
| 1100 | H12 | 16 | 15 | 4 | 12 | 110.3 | 103.4 |
| H14 | 18 | 17 | 3 | 10 | 124.1 | 117.2 | |
| 3003 | H12 | 19 | 18 | 9 | 11 | 131 | 124.1 |
| H14 | 22 | 21 | 3 | 7 | 151.7 | 144.8 | |
| 3004 | H32 | 31 | 25 | 6 | 15 | 213.7 | 172.4 |
| H34 | 35 | 29 | 5 | 10 | 241.3 | 199.9 | |
| 3005 | H12 | 26 | 24 | 5 | 13 | 179.3 | 165.5 |
| H14 | 29 | 28 | 4 | 9 | 199.9 | 193.1 | |
| 5005 | H12 | 20 | 19 | 5 | 9 | 137.9 | 131 |
| H14 | 23 | 22 | 4 | 7 | 158.6 | 151.7 | |
| 5052 | H32 | 33 | 28 | 7 | 10 | 227.5 | 193.1 |
| H34 | 38 | 31 | 6 | 8 | 262 | 213.7 | |
| 5056 | O | 42 | 22 | 23 | 24 | 289.6 | 151.7 |
| H38 | 60 | 50 | 6 | 13 | 413.7 | 344.7 | |
| 6061 | T4 | 35 | 21 | 22 | 24 | 241.3 | 144.8 |
| T6 | 45 | 40 | 12 | 17 | 310.3 | 275.8 | |
| 7075 | O | 33 | 15 | 16 | 18 | 227.5 | 103.4 |
| T6 | 83 | 73 | 11 | 12 | 572.3 | 503. | |
Company Introduction
Certification