5083 Aluminum Alloy Plate Exfoliation Corrosion Resistance IRIS Approval
Typical alloy: 5754,5083,5182,5086,5383 ,5059 ,5052,5454
Products detail of aluminium alloy sheet grade 5083:
- Can provide aluminium alloy plate 5083
- Can provide aluminium plate 5083 h321
- Can provide aluminium plate 5083 h111
- Can provide aluminium plate / sheet grade 5083
- Can provide aluminium plate alloy 5083 0/h111
- Can provide aluminium plate 5083 h116
- Can provide marine aluminium plate 5083
- Aluminium alloy sheet grade 5083 ALMg4.5Mn0.7 A5083 NT8
Application of aluminium alloy sheet grade 5083:
- Temper O is used for sealing head, wave board.
- Temper H32 and H111 be used for tank body
-
Aluminium tank in petrol transportation.
-
5083-H321 suitable for liquefied natural gas transportation
-
Aluminium tooling plate 5083
Product character for aluminium alloy sheet grade 5083:
- 1>. The elongation is higher than the standard requirements,Improve safety factor of tanker.
- 2 >. High strength, excellent machining performance, corrosion resistance, exfoliation corrosion resistance
- 3>. Inter-crystalline corrosion resistance, recyclable.
Products introduction for 5083 aluminium plate:
- Due to the oxidation film formed on the surface of aluminium products, aluminium tanks can be directly used to transport various liquid and liquefied gases without any inner protective coating, and the purity of oil can be guaranteed because there is no corrosion occurs within the tanks. Furthermore, there is few static electricity generate on aluminium tanks due to their excellent electrical conductivity, therefore the risk of explosion induced by spark can be eliminated.
- Additionally, aluminium tanks have large capability to absorb the transient energy generated during impact, and therefore prevent the tank from cracking, and leaking. In the meantime, by using aluminium tanks, the gravity centre of the trucks can be lowered, and hence decrease the risk of rollover. This is also the reason for BP and SHELL to use aluminium tanks in petrol transportation.
-
Aluminium alloy plate 5083 Chemical Composition
Cu | Mg | Mn | Fe | Si | Zn | Ti | Cr | Other | Aluminum |
0.1 | 4.0~4.9 | 0.40~1.0 | 0.4 | 0.4 | 0.25 | 0.15 | 0.05~0.25 | 0.15 | Remainder |
Aluminium 5083 datasheet & Mechanical Properties
Alloy | Temper | Yield Strength (Rm/Mpa) | Tensile Strength Rm(Mpa) | Elongation (%) | Bend Performance (180) | Standard |
5083 | O | Min.145 | 290 ~ 370 | Min.17 | 1.5t 4t | EN14286-2007 |
5083 | H111 | 124 ~ 200 | 276 ~351 | Min.16 | | ASME SB209 |
5083 aluminium sheet sizes/5083 aluminium plate specification
Alloy Series | TypIcial Alloy | Typcial Tempe | Thickness (MM) | Width (MM) | Length (MM) |
5××× | 5454,5754,5083,5182,5086, 5383,5059 | O,H111 | 5~8 | 1500~2500 | 2000-2400 |
